
35 N·m is low-speed spindle torque, paired with 7.5 kW. It sets how large a cutter you can run and how deep you can cut. On 45 steel or cast iron with a Ø63 face mill or Ø20 end mill, a low-torque spindle loses rpm and leaves chatter marks; the 850L's 35 N·m is the margin for that class of work.
10000 rpm, BT40, and 110–610 mm spindle nose to table distance make this a general-purpose vertical machining center: roughing steel and finishing aluminium. For high-speed aluminium-only work, a dedicated high-speed machine is better.
| Item | VMC-850L |
|---|---|
| Table size | 500×1000 mm |
| X / Y / Z travel | 800 / 500 / 500 mm |
| Spindle nose to table | 110–610 mm |
| Spindle center to column | 560 mm |
| Table load | 450 kg |
| T-slots | 5-18-90 |
| Rapid traverse | 24 / 24 / 20 m/min |
| Cutting feed | 10 / 10 / 10 m/min |
| Ballscrews | 4012 |
| Guideways X / Y / Z | MSA35LA roller / MSA45LA roller / hardened way with Turcite |
| Positioning accuracy | ±0.005 mm/300 mm |
| Repeatability | ±0.003 mm |
| Spindle speed / taper | 10000 rpm / BT40, 150 mm |
| Spindle power / torque | 7.5 kW / 35 N·m |
| Tool magazine | 24T disc |
| Axis motor torque | 13.7–47 N·m |
| CNC system | Mitsubishi M80B |
| Air / power | 6 kg/cm² / 20 kVA |
| Footprint / weight | 2700×2600×2560 mm / 5500 kg |
Roller guides have a larger contact area than ball guides, so they carry more load and resist shock — useful when workpiece weight varies. They also run with low friction, which is why X/Y reach 24 m/min. The Z axis carries the spindle head and the downward cutting force; a hardened way with Turcite gives contact stiffness and damping that a linear guide cannot match, while the Turcite liner reduces friction and stick-slip.
Mass absorbs cutting force. A 5500 kg casting with Ø40/12 mm ballscrews deflects less during heavy roughing, so dimensions stay in tolerance. Lighter machines often have to reduce depth of cut, which costs real cycle time.
±0.005 mm/300 mm and ±0.003 mm repeatability are factory acceptance values. Measure again after eight hours of cutting: drift usually points to thermal balance or guideway lubrication, not to the nominal figure.
Q1: What spindle does the VMC-850L use?
A: BT40, 150 mm nose, 10000 rpm, 7.5 kW / 35 N·m.
Q2: Why roller guides on X/Y but a hardened way on Z?
A: X/Y need speed and load capacity; Z needs damping against spindle weight and cutting force.
Q3: What accuracy is specified?
A: ±0.005 mm/300 mm positioning, ±0.003 mm repeatability.
Q4: Does 5500 kg matter?
A: Yes — mass damps vibration and reduces deflection in heavy cuts.
Q5: Does the 24T magazine add rigidity?
A: No. It adds process capability, not stiffness.
Q6: Which work is unsuitable?
A: Parts beyond 800/500/500 mm, over 450 kg, or needing five-axis contouring.
Product pages: VMC-850L vertical machining center · Vertical machining center category · QPR-46L gang-tool lathe · HMS-750MY turn-mill machine