News

QPR-46L vs QPR-36L: How to Choose a Gang-Tool Lathe (Bar Ø46 or Ø36)

By: Ruian Precision Machinery Views: 19 Date: 2026-11-21
Short answer: for bar stock up to Ø46 mm and parts up to Ø420 mm, take the QPR-46L (Ø56 mm spindle bore, 4500 rpm, 7.5 kW/35 N·m, 270 mm turning length). For bar stock Ø36 mm or below and parts shorter than 230 mm where cycle time and unit cost matter more, take the QPR-36L (Ø45 mm bore, 5000 rpm, 5.5 kW/28 N·m). Both are gang-tool lathes; the dividing line is not price but bar diameter, part length and torque.

What actually separates the QPR-46L from the QPR-36L?

Three numbers decide it. First, bar capacity: Ø46 mm versus Ø36 mm, with spindle bores of Ø56 mm and Ø45 mm. Second, turning length: 270 mm versus 230 mm. Third, torque: 7.5 kW/35 N·m versus 5.5 kW/28 N·m. If your bar is Ø40, the QPR-36L cannot be fed; if your part is a Ø30 pin under 200 mm, the QPR-46L wastes cycle time on longer travels.

QPR-46L high-speed gang-tool lathe
QPR-46L gang-tool lathe
QPR-36L compact gang-tool lathe
QPR-36L gang-tool lathe

QPR-46L vs QPR-36L specification table

Item QPR-46L QPR-36L
Swing over bed Ø420 mm Ø400 mm
Max. turning diameter Ø420 mm Ø400 mm
Diameter over carriage Ø126 mm Ø100 mm
Max. turning length 270 mm 230 mm
Bar capacity Ø46 mm Ø36 mm
Spindle nose / bore A2-5 / Ø56 mm A2-4 / Ø45 mm
Spindle speed 4500 rpm 5000 rpm
Collet 6-inch hydraulic 5-inch hydraulic
X / Z travel 900 / 280 mm 650 / 230 mm
Rapid traverse 24 / 24 m/min 24 m/min
Linear guideway 30 mm ball 25 mm ball
Tool holders 20×20 OD / Ø20 ID 16×16 OD / Ø20 ID
Spindle power / torque 7.5 kW / 35 N·m 5.5 kW / 28 N·m
Footprint 2300×1500×1800 mm —
Weight 2500 kg 2200 kg

Why is a gang-tool lathe faster on small parts?

There is no turret to index. Tools sit on a common slide, so tool-to-tool change is a short slide movement instead of a turret rotation. On a 30-second cycle with five tools, that difference is seconds per part. The trade-off: fewer tool stations and shorter travel, so it suits small, high-volume turned parts rather than complex multi-feature work.

Which parts should go to which machine?

Pins, sleeves, bushings, connectors, small shafts under 230 mm and Ø36 bar: QPR-36L. Larger flanges, Ø40–46 bar parts, components needing heavier roughing or up to 270 mm length: QPR-46L. If the part needs cross-drilling or milling off-centre, neither gang-tool lathe is the right answer — look at a turret or turn-mill machine instead.

FAQ

Q1: What bar size can the QPR-46L take?

A: Ø46 mm bar, Ø56 mm spindle bore, A2-5, 4500 rpm, 6-inch hydraulic collet.

Q2: What bar size can the QPR-36L take?

A: Ø36 mm bar, Ø45 mm spindle bore, A2-4, 5000 rpm, 5-inch hydraulic collet.

Q3: Which is faster on small parts?

A: QPR-36L — 5000 rpm and 650 mm X travel shorten non-cutting time on parts under 230 mm.

Q4: How much torque do they have?

A: QPR-46L 7.5 kW/35 N·m; QPR-36L 5.5 kW/28 N·m.

Q5: Maximum turning length?

A: 270 mm on QPR-46L, 230 mm on QPR-36L.

Q6: Do both use linear guideways?

A: Yes — 30 mm ball guides on QPR-46L, 25 mm on QPR-36L, 24 m/min rapid traverse.

Contact us

Phone: +86 13929438020
Email: Vince@ruiancnc.com
Address: 1F, Building 7, No. 8 Tiankeng Gaoxin Road, Hengli Town, Dongguan, China
Website: ruiancnc.cn

Product pages: QPR-46L gang-tool lathe · QPR-36L gang-tool lathe · Gang-tool lathe category · VMC-850L machining center

Further reading

Related articles