
Three numbers decide it. First, bar capacity: Ø46 mm versus Ø36 mm, with spindle bores of Ø56 mm and Ø45 mm. Second, turning length: 270 mm versus 230 mm. Third, torque: 7.5 kW/35 N·m versus 5.5 kW/28 N·m. If your bar is Ø40, the QPR-36L cannot be fed; if your part is a Ø30 pin under 200 mm, the QPR-46L wastes cycle time on longer travels.
| Item | QPR-46L | QPR-36L |
|---|---|---|
| Swing over bed | Ø420 mm | Ø400 mm |
| Max. turning diameter | Ø420 mm | Ø400 mm |
| Diameter over carriage | Ø126 mm | Ø100 mm |
| Max. turning length | 270 mm | 230 mm |
| Bar capacity | Ø46 mm | Ø36 mm |
| Spindle nose / bore | A2-5 / Ø56 mm | A2-4 / Ø45 mm |
| Spindle speed | 4500 rpm | 5000 rpm |
| Collet | 6-inch hydraulic | 5-inch hydraulic |
| X / Z travel | 900 / 280 mm | 650 / 230 mm |
| Rapid traverse | 24 / 24 m/min | 24 m/min |
| Linear guideway | 30 mm ball | 25 mm ball |
| Tool holders | 20×20 OD / Ø20 ID | 16×16 OD / Ø20 ID |
| Spindle power / torque | 7.5 kW / 35 N·m | 5.5 kW / 28 N·m |
| Footprint | 2300×1500×1800 mm | — |
| Weight | 2500 kg | 2200 kg |
There is no turret to index. Tools sit on a common slide, so tool-to-tool change is a short slide movement instead of a turret rotation. On a 30-second cycle with five tools, that difference is seconds per part. The trade-off: fewer tool stations and shorter travel, so it suits small, high-volume turned parts rather than complex multi-feature work.
Pins, sleeves, bushings, connectors, small shafts under 230 mm and Ø36 bar: QPR-36L. Larger flanges, Ø40–46 bar parts, components needing heavier roughing or up to 270 mm length: QPR-46L. If the part needs cross-drilling or milling off-centre, neither gang-tool lathe is the right answer — look at a turret or turn-mill machine instead.
Q1: What bar size can the QPR-46L take?
A: Ø46 mm bar, Ø56 mm spindle bore, A2-5, 4500 rpm, 6-inch hydraulic collet.
Q2: What bar size can the QPR-36L take?
A: Ø36 mm bar, Ø45 mm spindle bore, A2-4, 5000 rpm, 5-inch hydraulic collet.
Q3: Which is faster on small parts?
A: QPR-36L — 5000 rpm and 650 mm X travel shorten non-cutting time on parts under 230 mm.
Q4: How much torque do they have?
A: QPR-46L 7.5 kW/35 N·m; QPR-36L 5.5 kW/28 N·m.
Q5: Maximum turning length?
A: 270 mm on QPR-46L, 230 mm on QPR-36L.
Q6: Do both use linear guideways?
A: Yes — 30 mm ball guides on QPR-46L, 25 mm on QPR-36L, 24 m/min rapid traverse.
Product pages: QPR-46L gang-tool lathe · QPR-36L gang-tool lathe · Gang-tool lathe category · VMC-850L machining center