
Bottom line: the HMS-320MY is a small-part production machine. If your part is within Φ220 mm at the tool, no longer than 300 mm, and the bar is Φ46 mm or less, its 12-station BMT45 turret with Y-axis ±35 mm will do the whole job in one clamping. Exceed any of those three numbers and the machine is the wrong size, no matter how good the price looks.
Most first-time buyers read "bed swing Φ500 mm" as "it turns Φ500 mm parts". Those two numbers are not the same thing. Bed swing is how large a workpiece can rotate above the bed; the turret reach decides where a tool can actually cut. On the HMS-320MY the turret envelope is Φ220 mm. Below, every figure is taken from the product specification table on this site.

HMS-320MY compact turn-mill
Four numbers define the machine. Bed swing Φ500 mm, maximum turning diameter Φ350 mm, turret maximum turning diameter Φ220 mm, maximum machining length 300 mm. Add bar capacity Φ46 mm, and you have the complete envelope. The spindle is A2-5, through bore Φ56 mm, 4500 rpm, 6-inch chuck. Travel is X 250 mm, Z 400 mm, Y ±35 mm.
The structure is a 35-size linear-guide design with a 7.5 kW / 35.8 N·m spindle motor. Rapid traverse is 24 m/min in X and Z, 10 m/min in Y. The turret is a BMT45-12T with 12 stations and live tooling at 2.3 kW / 11.0 N·m; external tool shank 25 × 25 mm, internal boring bar Φ32 mm. The tailstock is Z-axis driven, sleeve Φ60 mm, stroke 80 mm, MT4, rail travel 350 mm. Footprint 2230 × 1800 × 1750 mm, weight about 3500 kg.
| Item | HMS-320MY |
|---|---|
| Bed swing | Φ500 mm |
| Max. turning diameter | Φ350 mm |
| Turret max. turning diameter | Φ220 mm |
| Max. machining length | 300 mm |
| Bar capacity | Φ46 mm |
| Spindle | A2-5, bore Φ56 mm, 4500 rpm, 6-inch chuck |
| Travel X / Z / Y | 250 / 400 / ±35 mm |
| Rapid traverse X / Z / Y | 24 / 24 / 10 m/min |
| Turret | BMT45-12T, 12 stations, live tooling 2.3 kW / 11.0 N·m |
| Spindle motor | 7.5 kW / 35.8 N·m |
| Tailstock | Z-driven, sleeve Φ60 mm, stroke 80 mm, MT4 |
| Footprint / weight | 2230 × 1800 × 1750 mm / approx. 3500 kg |
Three families fit naturally. First, small shaft-type parts with cross holes or milled flats: sensor housings, valve spools, small hydraulic fittings. Second, short turned parts that need a milled feature on the same side, where a second op would cost more than the machine time. Third, parts that are bought in bar and finished in one cycle, up to Φ46 mm.
What does not fit: anything requiring more than 300 mm between the chuck and the tailstock, anything needing a Φ250 mm facing cut, and any bar above Φ46 mm. Those jobs are not "slow" on a 320MY, they are simply outside the geometry.
Without Y, off-centre holes need a second machine or a fixture that rotates the part. With Y ±35 mm, the turret moves the tool off the centre line while the spindle holds C-axis position, so a cross hole, an eccentric pocket or a milled slot is done in the same clamping. On a part of this size, one eliminated second operation typically removes more cost than the price gap against a plain lathe.
For small parts, yes. A Φ40 mm bar at 120 mm length gives a part of roughly 1.2 kg before machining, which is already large for this class. Where the limit bites is when a family of parts spans Φ45 to Φ55 mm: the 320MY handles the small end, the HMS-550MY (bar Φ52 mm, spindle A2-6, bore Φ65 mm, 11 kW / 72 N·m) handles the rest. Splitting the family across two models is usually cheaper than forcing everything onto one machine.
Move up when any of these appear: bar above Φ46 mm, part longer than 300 mm, tool envelope beyond Φ220 mm, or steel parts that need a deeper cut than 7.5 kW / 35.8 N·m will sustain without chatter. The HMS-550MY gives Φ52 mm bar, 510 mm maximum length, Φ420 mm maximum turning diameter and 11 kW / 72 N·m, on the same BMT55 platform family.
Specification pages on this site: HMS-320MY, HMS-550MY, HMS-550MYS, HMS-750.
Q1: What is the HMS-320MY designed for?
A: Small, repeatable parts. Its bed swing is Φ500 mm, maximum turning diameter Φ350 mm, but the turret can only reach Φ220 mm, and maximum machining length is 300 mm. Bar capacity is Φ46 mm. Everything above that belongs to the HMS-550 or HMS-750 class.
Q2: Why is the turret limit Φ220 mm when the bed swings Φ500 mm?
A: Bed swing describes how large a workpiece can rotate without hitting the bed. The turret limit describes where the tool can actually cut. On the HMS-320MY the tool interference envelope is Φ220 mm, so a Φ300 mm part will rotate but cannot be machined all the way around.
Q3: Can the HMS-320MY run bar work unattended?
A: Yes, up to Φ46 mm bar. The spindle is A2-5 with a Φ56 mm through bore, 4500 rpm and a 6-inch chuck. The 10 mm difference between bore and bar capacity is the clamping and clearance margin, so a Φ48 mm bar will not pass reliably.
Q4: What does Y-axis ±35 mm buy me on such a small machine?
A: It lets one turret handle off-centre milling, drilling and tapping without a second operation. Combined with the 12-station BMT45 live-tool turret (2.3 kW / 11.0 N·m), a small part can be turned, milled and cross-drilled in one clamping.
Q5: How fast is the HMS-320MY in rapid moves?
A: Rapid traverse is 24 m/min in X and Z, 10 m/min in Y. With 250 mm X travel and 400 mm Z travel, non-cutting time stays short on small parts where the cycle is already only a few minutes.
Q6: Is the machine rigid enough for steel?
A: The spindle motor is 7.5 kW with 35.8 N·m, on 35-size linear guides. That is a light-to-medium cut envelope: fine for small steel and stainless parts with modest depth of cut, not for heavy roughing. If you need heavy stock removal, step up to the HMS-550MY at 11 kW / 72 N·m.
Q7: When should I stop looking at the HMS-320MY?
A: Three triggers: bar larger than Φ46 mm, part longer than 300 mm, or turning diameter beyond Φ220 mm at the tool. Any one of them means the cycle will be compromised, and the HMS-550MY (Φ52 mm bar, 510 mm length) or HMS-750 is the correct starting point.
Dongguan Ruian Precision Machinery Co., Ltd.
Tel / WhatsApp: +86 13929438020 (Vince) Email: Vince@ruiancnc.com
Address: Floor 1, Building 7, No. 8 Tiankeng Gaoxin Road, Hengli Town, Dongguan, Guangdong, China
Website: ruiancnc.cn
Further reading