
TW-650
Product Overview The TW-650 is a trunnion-type 5-axis vertical machining center from Dongguan Ruian Precision Machinery, aimed at mid-size parts that need several faces machined in one setup. The machine pairs a wide-span gantry structure with a Ø630 5-axis trunnion table: the A axis tilts ±120° and the C axis rotates a full 360°, while the spindle is offered with either an HSK-A63 or a BBT40 taper, up to 20,000 rpm and 20 kW. Travels are 700 / 900 / 500 mm, the table carries 500 kg, and the tool magazine holds 40 tools in a chain configuration. The structure was developed from 3D digital models and validated with finite-element static and dynamic simulation, so the delivered machine matches its design targets. Typical work covers housings, discs and structural components for aerospace, medical devices, defence and new- energy vehicle applications.
The TW-650 is a trunnion-type 5-axis vertical machining center from Dongguan Ruian Precision Machinery, aimed at mid-size parts that need several faces machined in one setup. The machine pairs a wide-span gantry structure with a Ø630 5-axis trunnion table: the A axis tilts ±120° and the C axis rotates a full 360°, while the spindle is offered with either an HSK-A63 or a BBT40 taper, up to 20,000 rpm and 20 kW. Travels are 700 / 900 / 500 mm, the table carries 500 kg, and the tool magazine holds 40 tools in a chain configuration. The structure was developed from 3D digital models and validated with finite-element static and dynamic simulation, so the delivered machine matches its design targets. Typical work covers housings, discs and structural components for aerospace, medical devices, defence and new-energy vehicle applications.
|
Item |
Specification |
|
CNC control |
Siemens SINUMERIK ONE |
|
Travels X / Y / Z |
700 / 900 / 500 mm |
|
Table |
Ø630 mm, 500 kg capacity |
|
Spindle |
HSK-A63 or BBT40, up to 20,000 rpm, 20 / 30 kW |
|
Spindle nose to table |
120–620 mm |
|
A / C axis |
±120° / 360° |
|
Tool magazine |
40-station chain type |
|
Positioning / repeatability |
±0.005 / 300 mm, ±0.003 / 300 mm |
|
Machine weight |
13,000 kg |
|
Item |
Specification |
|
CNC control |
Siemens SINUMERIK ONE |
|
X-axis travel |
700 mm |
|
Y-axis travel |
900 mm |
|
Z-axis travel |
500 mm |
|
Table size |
Ø630 mm |
|
Table load capacity |
500 kg |
|
Spindle taper |
HSK-A63 (standard) / BBT40 (optional) |
|
Spindle speed |
20,000 rpm (identical for both HSK-A63 and BBT40) |
|
Spindle nose to table surface |
120–620 mm |
|
A-axis tilt range |
±120° |
|
A-axis max speed |
85 rpm |
|
A-axis continuous torque |
1,200 N·m |
|
A-axis peak torque |
2,180 N·m |
|
A-axis positioning / repeatability |
±5″ / 4″ |
|
A-axis clamping torque |
2,400 N·m |
|
C-axis rotation |
360° |
|
C-axis max speed |
179 rpm |
|
C-axis continuous torque |
600 N·m |
|
C-axis peak torque |
1,100 N·m |
|
C-axis positioning / repeatability |
±5″ / 4″ |
|
C-axis clamping torque |
2,400 N·m |
|
Clamping type |
Pneumatic (AIR) |
|
Rapid traverse |
36 / 36 / 36 m/min |
|
Cutting feed |
1–12,000 mm/min |
|
X/Y/Z guideways |
X45 / Y45 / Z45 (roller type) |
|
X/Y/Z ball screws |
X4012 / Y4012 / Z4012 |
|
Axis motor coupling |
Direct coupled |
|
Tool magazine capacity |
40 tools |
|
Tool change type |
Chain type (flat chain) |
|
Max tool length |
280 mm |
|
Max tool diameter |
Ø120 (adjacent station empty) / Ø80 |
|
Max tool weight |
8 kg |
|
Tool-to-tool change time |
≤12 s |
|
Tool pre-selection |
Yes |
|
Spindle motor |
20.0 / 30.0 kW (S1 / S6) |
|
Axis servo motors |
4.5 / 4.5 / 4.5 kW |
|
Power supply |
380 V |
|
Total connected load |
35 kVA |
|
Air pressure |
6 kg/cm² |
|
Floor space |
3,511 × 3,676 × 3,000 mm |
|
Machine weight |
13,000 kg |
|
Positioning accuracy |
±0.005 / 300 mm |
|
Repeatability |
±0.003 / 300 mm |
|
Component |
Brand |
Origin |
|
CNC control |
Siemens |
Germany |
|
Spindle motor |
Siemens |
Germany |
|
Spindle |
Jianchun / Okada / NTU |
Taiwan |
|
X/Y/Z servo motors |
Siemens |
Germany |
|
Spindle bearings |
NSK / FAG |
Japan / Germany |
|
Axis bearings |
NSK / FAG |
Japan / Germany |
|
Ball screws |
THK / PMI / HIWIN |
Japan / Taiwan |
|
X/Y/Z linear guides |
THK / PMI / HIWIN |
Japan / Taiwan |
|
5-axis trunnion table |
Lanlan |
Taiwan |
|
Tool magazine |
GANG TIAN |
Taiwan |
|
Coolant pump motor |
Snar |
China |
|
Operator panel |
Domestic |
China |
|
Cabinet air conditioner |
Feihe |
China |
|
Pneumatic solenoid valves |
Yadeg (AirTAC) |
Taiwan |
|
Air compressor parts |
Yadeg (AirTAC) |
Taiwan |
|
Electrical components |
Schneider |
France |
一、 Specification and Capability
1. How much can the TW-650 table carry? The Ø630 5-axis trunnion table is rated to 500 kg, which covers mid-size discs, housings and mould inserts.
2. What is the A-axis range and torque? The A axis tilts ±120° at up to 85 rpm, with 1,200 N·m continuous and 2,180 N·m peak torque, so inclined faces and side features can be machined in continuous simultaneous motion.
3. How many tools does the magazine hold, and how big can they be? 40 tools in a chain magazine, with a maximum tool length of 280 mm, maximum diameter of Ø120 (with the adjacent station empty) or Ø80, and 8 kg per tool. Tool-to-tool change is within 12 seconds and pre-selection is supported.
二、Selection
4. TW-650 or TW-400? The TW-400 is a bridge-type machine with a Ø400 table and 200 kg capacity, so it is more compact and lower cost. The TW-650 is a trunnion machine with a Ø630 table, 500 kg capacity and 700/900/500 mm travels for larger mid-size parts. If the part exceeds Ø400 or 200 kg, the TW-650 is the right choice.
5. TW-650 or TW-800? The TW-650 uses an HSK-A63 spindle at 20,000 rpm, suited to high-speed light cutting such as aluminium. The TW-800 uses a BBT40 spindle at 12,000 rpm with a 1,200 kg table, aimed at heavy cutting in steel and larger parts.
6. HSK-A63 or BBT40 spindle — which one? HSK-A63 makes dual contact on both taper and flange, giving better rigidity at high speed, and is the usual choice for 20,000 rpm light cutting in aluminium and 3C work. BBT40 is a larger taper with far broader tool-holder availability and is preferred where low-speed torque and heavy cutting matter. Both are available on the TW-650; the right pick depends on the material and cutting parameters, and our engineering team can recommend one for a specific part.