
TW-800
The TW-800 is a trunnion-type 5-axis vertical machining center from Dongguan Ruian Precision Machinery, built for large parts that carry real weight on the table. The Ø800 5-axis trunnion table accepts up to 1,200 kg, the A axis tilts ±120° with 2,100×2 N·m continuous torque, and the C axis rotates 360° with 2,200 N·m. The spindle is a direct-drive unit offered with either a BBT40 or an HSK-A63 taper, running 12,000 rpm at 11 kW. Travels are 850 / 1,000 / 600 mm, the Y axis uses a twin ball-screw arrangement, the magazine holds 40 tools in a chain configuration with an 8-second tool change, and the machine weighs 16,000 kg. It suits medium moulds, automotive components, energy equipment and general machinery parts that need five-face machining with high rigidity.
|
Item |
Specification |
|
CNC control |
SINUMERIK ONE (NCU 1750) |
|
Travels X / Y / Z |
850 / 1,000 / 600 mm |
|
Table |
Ø800 mm, 1,200 kg capacity |
|
Spindle |
BBT40 or HSK-A63, 12,000 rpm, 11 kW |
|
Spindle nose to table |
180–780 mm |
|
A / C axis |
±120° / 360° |
|
Tool magazine |
40-station chain type |
|
Positioning / repeatability |
±0.005 / 300 mm, ±0.003 / 300 mm |
|
Machine weight |
16,000 kg |
|
Item |
Specification |
|
CNC control |
SINUMERIK ONE (NCU 1750) |
|
X-axis travel |
850 mm |
|
Y-axis travel |
1,000 mm |
|
Z-axis travel |
600 mm |
|
Table size |
Ø800 mm |
|
Table load capacity |
1,200 kg |
|
Spindle taper |
BBT40 (standard) / HSK-A63 (optional) |
|
Spindle speed |
12,000 rpm |
|
Spindle nose to table surface |
180–780 mm |
|
A-axis tilt range |
±120° |
|
A-axis max speed |
60 rpm |
|
A-axis continuous torque |
2,100×2 N·m |
|
A-axis peak torque |
3,510×2 N·m |
|
A-axis positioning / repeatability |
±5″ / 3″ |
|
A-axis clamping torque |
8,400 N·m |
|
C-axis rotation |
360° |
|
C-axis max speed |
100 rpm |
|
C-axis continuous torque |
2,200 N·m |
|
C-axis peak torque |
3,900 N·m |
|
C-axis positioning / repeatability |
±4″ / 3″ |
|
C-axis clamping torque |
4,200 N·m |
|
Clamping type |
Pneumatic (AIR) |
|
Rapid traverse |
36 / 36 / 36 m/min |
|
Cutting feed |
1–12,000 mm/min |
|
X/Y/Z guideways |
X35 / Y45 / Z35 (roller type) |
|
X/Y/Z ball screws |
X4012 / Y5020×2 / Z4012 |
|
Axis motor coupling |
Direct coupled |
|
Tool magazine capacity |
40 tools |
|
Tool change type |
Chain type (flat chain) |
|
Max tool length |
300 mm |
|
Max tool diameter |
Ø120 (adjacent station empty) / Ø80 |
|
Max tool weight |
8 kg |
|
Tool-to-tool change time |
≤8 s |
|
Tool pre-selection |
Yes |
|
Spindle motor |
11.0 kW (continuous) |
|
Axis servo motors |
4.5 / 4.5×2 / 5.5 kW |
|
Power supply |
380 V |
|
Total connected load |
55 kVA |
|
Air pressure |
6 kg/cm² |
|
Floor space |
3,938 × 3,822 × 3,547 mm |
|
Machine weight |
16,000 kg |
|
Positioning accuracy |
±0.005 / 300 mm |
|
Repeatability |
±0.003 / 300 mm |
|
Component |
Brand |
Origin |
|
CNC control |
Siemens |
Germany |
|
Spindle motor |
Siemens |
Germany |
|
Spindle |
Taida / Haozhi |
China |
|
X/Y/Z servo motors |
Siemens |
Germany |
|
Spindle bearings |
NSK / FAG |
Japan / Germany |
|
Axis bearings |
NSK / FAG |
Japan / Germany |
|
Ball screws |
THK / PMI / HIWIN |
Japan / Taiwan |
|
X/Y/Z linear guides |
THK / PMI / HIWIN |
Japan / Taiwan |
|
5-axis trunnion table |
MKD |
Taiwan |
|
Tool magazine |
GANG TIAN |
Taiwan |
|
Coolant pump motor |
HEYI |
China |
|
Operator panel |
Domestic |
China |
|
Cabinet air conditioner |
Feihe |
China |
|
Pneumatic solenoid valves |
Yadeg (AirTAC) |
Taiwan |
|
Air compressor parts |
Yadeg (AirTAC) |
Taiwan |
|
Electrical components |
Schneider |
France |
Specification and Capability
1. How much can the TW-800 table carry? The Ø800 5-axis trunnion table is rated to 1,200 kg, enough for medium moulds, housings and flange parts in one clamping.
2. What torque do the A and C axes deliver? A axis: 2,100×2 N·m continuous, 3,510×2 N·m peak, with 8,400 N·m clamping. C axis: 2,200 N·m continuous, 3,900 N·m peak, with 4,200 N·m clamping.
3. How many tools, and how fast is the change? 40 tools in a chain magazine, with a maximum tool length of 300 mm, maximum diameter of Ø120 (adjacent station empty) or Ø80, and 8 kg per tool. Tool-to-tool change is within 8 seconds and pre-selection is supported.
Selection
4. TW-800 or TW-650? The TW-650 has a Ø630 table, 500 kg capacity and an HSK-A63 spindle at 20,000 rpm, aimed at high-speed light cutting. The TW-800 has a Ø800 table, 1,200 kg capacity and a BBT40 spindle at 12,000 rpm, aimed at heavy cutting in steel and larger parts. Above 500 kg, or when BBT40 rigidity is the deciding factor, the TW-800 is the machine.
5. Which spindle tapers are available? BBT40 is standard and HSK-A63 is optional. BBT40 gives the widest tool-holder availability and maximum rigidity for heavy cutting; HSK-A63 adds dual taper-and-flange contact for better rigidity at higher speeds. Either taper can be specified to suit the customer’s process.
Production Support
6. Are linear scales standard? No. X/Y/Z linear scales are an option, available in Renishaw or Heidenhain.