Products

TW-650 Trunnion-Type 5-Axis Machining Center

Model / Category:

TW-650

Product Overview:

Product Overview The TW-650 is a trunnion-type 5-axis vertical machining center from Dongguan Ruian Precision Machinery, aimed at mid-size parts that need several faces machined in one setup. The machine pairs a wide-span gantry structure with a Ø630 5-axis trunnion table: the A axis tilts ±120° and the C axis rotates a full 360°, while the spindle is offered with either an HSK-A63 or a BBT40 taper, up to 20,000 rpm and 20 kW. Travels are 700 / 900 / 500 mm, the table carries 500 kg, and the tool magazine holds 40 tools in a chain configuration. The structure was developed from 3D digital models and validated with finite-element static and dynamic simulation, so the delivered machine matches its design targets. Typical work covers housings, discs and structural components for aerospace, medical devices, defence and new- energy vehicle applications.

 Product Overview

The TW-650 is a trunnion-type 5-axis vertical machining center from Dongguan Ruian Precision Machinery, aimed at mid-size parts that need several faces machined in one setup. The machine pairs a wide-span gantry structure with a Ø630 5-axis trunnion table: the A axis tilts ±120° and the C axis rotates a full 360°, while the spindle is offered with either an HSK-A63 or a BBT40 taper, up to 20,000 rpm and 20 kW. Travels are 700 / 900 / 500 mm, the table carries 500 kg, and the tool magazine holds 40 tools in a chain configuration. The structure was developed from 3D digital models and validated with finite-element static and dynamic simulation, so the delivered machine matches its design targets. Typical work covers housings, discs and structural components for aerospace, medical devices, defence and new-energy vehicle applications.

 Key Advantages

  • Minimal axis stacking: the 5-axis layout deliberately limits how far the linear axes overlap one another, removing the cumulative error that conventional 5-axis designs accept in exchange for lower weight or a simpler structure.
  • A axis parallel to X: because the A-axis centreline runs parallel to X, tilt-axis vibration does not feed into the X-axis linear motion during high-speed moves, which keeps simultaneous 5-axis paths tighter.
  • Integrated axis feed system: absolute servo motors on all three axes, matched to an imported high-performance CNC, meet the demand for fast traverse, high accuracy and frequent acceleration and deceleration.
  • Wide-span gantry, rigid Z axis: the X-axis saddle spans the top of the gantry columns and the Z-axis moving mass is carried by the X-axis casting, so cutting rigidity at the spindle is preserved.
  • Thermally symmetrical bed: the base uses a wide-span, high-rigidity casting with a multi-layer box structure. Combined with thermally symmetrical design and hand-scraped contact surfaces, geometry stays stable under high acceleration and short-pitch path commands, so accuracy degrades more slowly over the machine's life.

 


 

At a Glance

Item

Specification

CNC control

Siemens SINUMERIK ONE

Travels X / Y / Z

700 / 900 / 500 mm

Table

Ø630 mm, 500 kg capacity

Spindle

HSK-A63 or BBT40, up to 20,000 rpm, 20 / 30 kW

Spindle nose to table

120–620 mm

A / C axis

±120° / 360°

Tool magazine

40-station chain type

Positioning / repeatability

±0.005 / 300 mm, ±0.003 / 300 mm

Machine weight

13,000 kg

 


 

 Technical Specifications

Item

 Specification

CNC control

Siemens SINUMERIK ONE

X-axis travel

700 mm

Y-axis travel

900 mm

Z-axis travel

500 mm

Table size

Ø630 mm

Table load capacity

500 kg

Spindle taper

HSK-A63 (standard) / BBT40 (optional)

Spindle speed

20,000 rpm (identical for both HSK-A63 and BBT40)

Spindle nose to table surface

120–620 mm

A-axis tilt range

±120°

A-axis max speed

85 rpm

A-axis continuous torque

1,200 N·m

A-axis peak torque

2,180 N·m

A-axis positioning / repeatability

±5″ / 4″

A-axis clamping torque

2,400 N·m

C-axis rotation

360°

C-axis max speed

179 rpm

C-axis continuous torque

600 N·m

C-axis peak torque

1,100 N·m

C-axis positioning / repeatability

±5″ / 4″

C-axis clamping torque

2,400 N·m

Clamping type

Pneumatic (AIR)

Rapid traverse

36 / 36 / 36 m/min

Cutting feed

1–12,000 mm/min

X/Y/Z guideways

X45 / Y45 / Z45 (roller type)

X/Y/Z ball screws

X4012 / Y4012 / Z4012

Axis motor coupling

Direct coupled

Tool magazine capacity

40 tools

Tool change type

Chain type (flat chain)

Max tool length

280 mm

Max tool diameter

Ø120 (adjacent station empty) / Ø80

Max tool weight

8 kg

Tool-to-tool change time

≤12 s

Tool pre-selection

Yes

Spindle motor

20.0 / 30.0 kW (S1 / S6)

Axis servo motors

4.5 / 4.5 / 4.5 kW

Power supply

380 V

Total connected load

35 kVA

Air pressure

6 kg/cm²

Floor space

3,511 × 3,676 × 3,000 mm

Machine weight

13,000 kg

Positioning accuracy

±0.005 / 300 mm

Repeatability

±0.003 / 300 mm

 


 

 Standard Configuration

  1. Simultaneous 5-axis control with RTCP
  2. Motor spindle, HSK-A63 or BBT40 taper, up to 20,000 rpm
  3. 40-station chain tool magazine
  4. 1.0 kW workpiece coolant system
  5. MPG handwheel
  6. Air-conditioned electrical cabinet (constant temperature and humidity)
  7. LED work light
  8. Tri-colour status light
  9. Spindle oil cooling
  10. Front chip discharge
  11. Automatic lubrication system
  12. Compressed air gun
  13. Coolant wash-down gun

Options

  1. Contact tool setter (Wentao)
  2. Workpiece probe (Wentao)
  3. Oil-water separator
  4. Chip conveyor with collection cart
  5. Additional CF card and card reader

Main Components

Component

 Brand

 Origin

CNC control

Siemens

Germany

Spindle motor

Siemens

Germany

Spindle

Jianchun / Okada / NTU

Taiwan

X/Y/Z servo motors

Siemens

Germany

Spindle bearings

NSK / FAG

Japan / Germany

Axis bearings

NSK / FAG

Japan / Germany

Ball screws

THK / PMI / HIWIN

Japan / Taiwan

X/Y/Z linear guides

THK / PMI / HIWIN

Japan / Taiwan

5-axis trunnion table

Lanlan

Taiwan

Tool magazine

GANG TIAN

Taiwan

Coolant pump motor

Snar

China

Operator panel

Domestic

China

Cabinet air conditioner

Feihe

China

Pneumatic solenoid valves

Yadeg (AirTAC)

Taiwan

Air compressor parts

Yadeg (AirTAC)

Taiwan

Electrical components

Schneider

France

 Installation Requirements

  • Power: 380 V, 35 kVA connected load, dedicated circuit with reliable earthing
  • Air: at least 6 kg/cm², refrigerated dryer and receiver tank recommended
  • Foundation: 13,000 kg machine weight requires a concrete base; an isolated foundation per the manufacturer's drawing is recommended
  • Environment: 5–40 °C, humidity ≤80%, away from direct sunlight and strong vibration sources
  • Space: 3,511 × 3,676 × 3,000 mm footprint, with clearance for lifting and service access

 


 

FAQ

一、 Specification and Capability

1. How much can the TW-650 table carry? The Ø630 5-axis trunnion table is rated to 500 kg, which covers mid-size discs, housings and mould inserts.

2. What is the A-axis range and torque? The A axis tilts ±120° at up to 85 rpm, with 1,200 N·m continuous and 2,180 N·m peak torque, so inclined faces and side features can be machined in continuous simultaneous motion.

3. How many tools does the magazine hold, and how big can they be? 40 tools in a chain magazine, with a maximum tool length of 280 mm, maximum diameter of Ø120 (with the adjacent station empty) or Ø80, and 8 kg per tool. Tool-to-tool change is within 12 seconds and pre-selection is supported.

二、Selection

4. TW-650 or TW-400? The TW-400 is a bridge-type machine with a Ø400 table and 200 kg capacity, so it is more compact and lower cost. The TW-650 is a trunnion machine with a Ø630 table, 500 kg capacity and 700/900/500 mm travels for larger mid-size parts. If the part exceeds Ø400 or 200 kg, the TW-650 is the right choice.

5. TW-650 or TW-800? The TW-650 uses an HSK-A63 spindle at 20,000 rpm, suited to high-speed light cutting such as aluminium. The TW-800 uses a BBT40 spindle at 12,000 rpm with a 1,200 kg table, aimed at heavy cutting in steel and larger parts.

6. HSK-A63 or BBT40 spindle — which one? HSK-A63 makes dual contact on both taper and flange, giving better rigidity at high speed, and is the usual choice for 20,000 rpm light cutting in aluminium and 3C work. BBT40 is a larger taper with far broader tool-holder availability and is preferred where low-speed torque and heavy cutting matter. Both are available on the TW-650; the right pick depends on the material and cutting parameters, and our engineering team can recommend one for a specific part.





Related Products