Turning Center

Model / Category:

HMS-1000M

Product Overview:

A turning center combines turning, milling, drilling and tapping capabilities, allowing complex workpieces to undergo multiple operations in one setup.

HMS-1000M Large Turning Center

The HMS-1000M is a large turning center for combined machining of shafts and discs. It offers Φ630 mm swing over bed, 950 mm machining length and Φ72 mm bar capacity, with a 12-position live turret and large tailstock.

Key features
1. Capacity: Φ630 mm swing over bed, Φ580 mm machining diameter, 950 mm length and Φ72 mm bar capacity.
2. Spindle: A2-8 nose, Φ87 mm bore, up to 2,500 rpm, 15 kW motor and 98 N·m maximum torque.
3. Combined machining: BNT55-12T live turret with 3.9 kW live-tool motor for turning, milling, drilling and tapping in one setup.
4. Tailstock: Morse No. 5, Φ100 mm quill, 120 mm quill travel and 1,250 mm tailstock travel for long shafts.
5. Structure: 45 mm ball-type linear guideways, X/Z travel 370/1,120 mm and net weight 6,800 kg.

At a glance
- Φ630 mm swing, 950 mm machining length and Φ72 mm bar capacity.
- A2-8 spindle with Φ87 mm bore, 15 kW/98 N·m and 2,500 rpm maximum speed.
- BNT55-12T live turret and 3.9 kW live-tool motor.
- Φ100 mm tailstock quill, 1,250 mm tailstock travel and 6,800 kg net weight.

Frequently asked questions

Specifications and capacity
Q: What are its maximum machining dimensions?
A: Φ630 mm swing over bed, Φ580 mm machining diameter, Φ370 mm over the toolholder and 950 mm maximum length.
Q: What bar size can it accept?
A: Maximum bar capacity is Φ72 mm; spindle bore is Φ87 mm with a 10-inch hydraulic collet.
Q: What is the spindle output?
A: Up to 2,500 rpm, with a 15 kW motor, 98 N·m maximum torque and A2-8 nose.
Q: What live turret is fitted?
A: A BNT55-12T 12-position live turret with a 3.9 kW live-tool motor.

Machine selection
Q: How does it compare with other models?
A: The 1000M offers 950 mm machining length, Φ72 mm bar capacity and a 15 kW spindle for larger work. The 550M or 750M may suit conventional medium parts.
Q: What does a turning center add to a conventional lathe?
A: Live tooling allows turning, milling, drilling and tapping in one setup, reducing handling and re-clamping for multi-operation parts.

Production and service
Q: Can it machine long shafts?
A: Yes. Its Morse No. 5 tailstock has a Φ100 mm quill, 120 mm quill travel and 1,250 mm tailstock travel.
Q: Can a chip conveyor or bar feeder be added?
A: Yes. Both are available as automation options.
Q: How is machining stability supported?
A: 45 mm ball-type guideways, SYNTEC servo drives, turret positioning and a rigid 6,800 kg structure support heavy cutting.
Q: What service and training are included?
A: The machine is offered with warranty, on-site installation and commissioning, and operation and maintenance training. Specific warranty terms are subject to the contract.