Drilling and Tapping Center

Model / Category:

VMC-T700

Product Overview:

A drilling and tapping center is designed for fast, accurate drilling, tapping and other precision machining operations.

VMC-T700 High-Speed Drilling and Tapping Center

The VMC-T700 is designed for drilling and tapping electronics and hardware components. It offers X/Y/Z travel of 700/450/330 mm, a BT30 spindle up to 20,000 rpm, 48 m/min rapid traverse and a 21-tool servo magazine.

Key features
1. BT30 spindle up to 20,000 rpm for high-speed drilling and tapping.
2. Three-axis rapid traverse of 48 m/min and cutting feed of 100–20,000 mm/min.
3. 800 × 420 mm table, 700/450/330 mm travel and maximum table load 250 kg.
4. BT30 21-tool arm-type servo magazine.
5. Mitsubishi M80A control, FAG/NSK bearings, THK screws, Rexroth guideways, Chuangneng spindle and HT300 cast-iron bed.

At a glance
- 700/450/330 mm travel; BT30 spindle up to 20,000 rpm.
- Three-axis rapid traverse 48 m/min; cutting feed up to 20,000 mm/min.
- 21-tool servo magazine and Mitsubishi M80A control.
- Net weight 2,800 kg for high-speed small-part machining.

Frequently asked questions

Specifications and capacity
Q: What are its travel and table capacity?
A: X/Y/Z travel is 700/450/330 mm; the 800 × 420 mm table carries up to 250 kg.
Q: What is the spindle speed?
A: Up to 20,000 rpm, BT30 taper, with a 5.5/7.5 kW motor.
Q: What accuracy is listed?
A: Positioning ±0.005 mm/300 mm; repeatability ±0.003 mm.

Machine selection
Q: VMC-T700 or VMC-T600?
A: The T700 lists 700/450/330 mm travel and 20,000 rpm. This original comparison lists the T600 at 600/400/330 mm and 15,000 rpm; confirm the T600 spindle configuration against its current specifications.
Q: What work suits a drilling and tapping center?
A: Batch drilling, tapping and light milling of electronics components, precision hardware and connectors.

Production and service
Q: How many tools does it hold?
A: A BT30 21-tool arm-type servo magazine supports automatic changes.
Q: How is accuracy supported?
A: 30 × 2 guideways, 3212/3616 precision screws, FAG/NSK bearings, THK screws, Rexroth guideways and a rigid bed.
Q: What service and training are included?
A: The machine is offered with warranty, on-site installation and commissioning, and operation and maintenance training. Specific warranty terms are subject to the contract.