Drilling and Tapping Center

Model / Category:

VMC-T600

Product Overview:

A drilling and tapping center combines precision and speed for industrial machining.

VMC-T600 High-Speed Drilling and Tapping Center

The VMC-T600 is designed for drilling and tapping electronics and precision hardware components. It offers X/Y/Z travel of 600/400/330 mm, a BT30 spindle up to 20,000 rpm, 48 m/min three-axis rapid traverse and a 21-tool servo magazine.

Key features
1. BT30 spindle up to 20,000 rpm, 48 m/min rapid traverse and cutting feed of 100–24,000 mm/min.
2. Work envelope: 700 × 420 mm table, 600/400/330 mm travel and maximum table load 300 kg.
3. Positioning accuracy ±0.005 mm/300 mm; repeatability ±0.003 mm.
4. BT30 21-tool arm-type servo magazine.
5. SYNTEC 22MA control, FAG/NSK spindle bearings, PMI ball screws, HT300 cast-iron bed and spindle oil cooler.

At a glance

• High-speed drill/tap center: 600/400/330 mm travel and BT30 spindle up to 20,000 rpm.
• Three-axis rapid traverse 48 m/min; cutting feed up to 24,000 mm/min.
• 21-tool servo magazine; positioning accuracy ±0.005 mm/300 mm.
• SYNTEC 22MA control; net weight 3,500 kg for electronics and precision hardware.

Frequently asked questions

1. Specifications and capacity

Q: What are its travel and table capacity?
A: X/Y/Z travel is 600/400/330 mm; the 700 × 420 mm table carries up to 300 kg.

Q: What is the spindle output?
A: BT30 taper, up to 20,000 rpm, with a 5.5 kW spindle motor.

Q: What accuracy is listed?
A: Positioning ±0.005 mm/300 mm; repeatability ±0.003 mm.

2. Machine selection

Q: Drilling and tapping center or vertical machining center?
A: A drill/tap center favors high spindle speed, fast traverse and light cutting with a BT30 taper; a BT40 vertical center is intended for higher-torque milling and heavier cuts.

Q: VMC-T600 or VMC-T700?
A: The T600 offers 600/400/330 mm travel; the T700 offers 700/450/330 mm. Both are listed at 20,000 rpm here; select according to the required travel and confirm the spindle configuration.3. Production

Q: How many tools does it hold?
A: A BT30 21-tool arm-type servo magazine supports automatic changes.

Q: What parts suit it?
A: Electronics housings and structural parts, precision hardware and small drilled or tapped components.

4. Accuracy and quality

Q: How is accuracy supported?
A: HGH30/HGH35 guideways, 3216/3616 precision screws, FAG/NSK bearings and an HT300 cast-iron bed.

5. Support

Q: What service and training are included?
A: The machine is offered with warranty, on-site installation and commissioning, and operation and maintenance training. Specific warranty terms are subject to the contract.