Turret Lathe

Model / Category:

HMS-1000

Product Overview:

A CNC turret lathe changes tools quickly using its integrated turret, supporting efficient and accurate machining for both volume production and varied, small-batch work.

HMS-1000 Large CNC Turret Lathe

The HMS-1000 is a large turret lathe for batch turning of shafts and discs. It offers Φ630 mm swing over bed, 1,000 mm machining length and Φ72 mm bar capacity, with a 12-position automatic turret and large tailstock.

Key features
1. Capacity: Φ630 mm swing over bed, Φ580 mm machining diameter, Φ360 mm over the toolholder, 1,000 mm length and Φ72 mm bar capacity.
2. Spindle: A2-8 nose, Φ87 mm bore, up to 2,500 rpm, 15 kW motor and 98 N·m maximum torque.
3. A 12-position automatic turret provides rapid tool changes for varied or batch work.
4. Tailstock: Morse No. 5, Φ100 mm quill, 120 mm quill travel and 1,250 mm tailstock travel.
5. Motion: 45 mm ball-type linear guideways, X/Z travel 370/1,120 mm and 24 m/min rapid traverse. Net weight is 6,500 kg.

At a glance
- Φ630 mm swing, 1,000 mm machining length and Φ72 mm bar capacity.
- A2-8 spindle with Φ87 mm bore, 15 kW/98 N·m and 2,500 rpm maximum speed.
- 12-position automatic turret and 1,250 mm tailstock travel.
- 6,500 kg net weight for heavy turning of large shafts and discs.

Frequently asked questions

Specifications and capacity
Q: What are its maximum machining dimensions?
A: Φ630 mm swing over bed, Φ580 mm machining diameter, Φ360 mm over the toolholder and 1,000 mm maximum length.
Q: What bar size can it accept?
A: Maximum bar capacity is Φ72 mm; spindle bore is Φ87 mm with a 10-inch hydraulic collet.
Q: What is the spindle output?
A: Up to 2,500 rpm, with a 15 kW motor, 98 N·m maximum torque and A2-8 nose.

Machine selection
Q: How does a turret lathe differ from a turning center?
A: This turret lathe is intended for turning with automatic tool changes. A turning center with live tooling can also mill, drill and tap. Choose based on the required operations.
Q: How does the HMS-1000 compare with other turret models?
A: It has 1,000 mm machining length, Φ630 mm swing and Φ72 mm bar capacity. The 550 or 750 models may suit conventional smaller parts.

Production and service
Q: Can it machine long shafts?
A: Yes. Its Morse No. 5 tailstock has a Φ100 mm quill, 120 mm quill travel and 1,250 mm tailstock travel.
Q: Can a chip conveyor or bar feeder be added?
A: Yes. Both are available as automation options.
Q: How is machining stability supported?
A: 45 mm ball-type guideways, SYNTEC servo drives, turret positioning and a rigid 6,500 kg bed support heavy cutting.
Q: What service and training are included?
A: The machine is offered with warranty, on-site installation and commissioning, and operation and maintenance training. Specific warranty terms are subject to the contract.